SKU#: D*FlowMeter
NOTE: Our item's thread type is UK BSPP, NOT US NPT. Please make sure you can accept it before you bid.
The K24 meter feature with complete function of flow meter,simple structure,easy operation,could apply for oil industry ,chemicals,medicine,food industry and commercial.
Model: K24
Application: Diesel, Adbule, Kerosene, Chemicals, Gasoline
Inlet&Outlet: 1’’
Accuracy: ±1%
Repeatablity: ±0.5%
Max pressure: 20 BAR
Voltage: 2.3-3.3V
Standby time: 2 years
Flow range: 10-120 L/MIN
Single accumulation: 0.00-9999.9
Total accumulation: 0.00-999999.9
Unit: L, GAL, PTS, QTS
Zero set: RESET
Power Supply: 2 x AAA battery(batteries are not included)
Operating modes:
The user can choose between two different operating modes:
Normal mode: Mode with display of Partial and Total dispensed quantities.
Flow rate mode: Mode with display of Flow Rate, as well as Partial dispensed quantity.
Unit choose:
1.Wait for K24 to go to Standby, press the CAL and RESET keys together shortly. The set of the unit of measurement will appear on the screen at that time.(in this example Litres / Litres)
2.Press the RESET key to select the desired combination of unit of measurement, amongst those shown below.
3.Save the new combination by pressing the CAL key at length. K24 will pass through the start cycle and will then be ready to dispense in the set units.
Reseting and reset total:
1.Wait for the display to show normal standby display page(with total only displayed)
2.Press the reset key quickly
3.The meter starts to reset the partial
4.While the display page showing the reset total is displayed Press the reset key again for at least 1 second
5.The display screen again shows all the segments of the diaplay followed by all the switched-off segments and finally shows the display page where the reset Reset Total is shown.
1x K24 Turbine Digital Diesel Fuel Flow Meter
- Stock: In Stock